Huatao Group teaches you how to maintain bottle blowing machines
(1) Whether the mold closing device is normal and reliable.
(2) Check whether the heating ring (heating plate) is firmly fixed and whether the wiring is short-circuited.
(3) Check the motor oil pump, piping, and valves for oil and water leakage.
(4) Check the liquid level in the fuel tank.
(5) Check the flow of cooling water and mold cooling medium.
(6) Check whether there are any abnormal noises in the motor oil pump, piping, valves, etc.
(7) Check the oil temperature. The temperature of the hydraulic oil is generally in the range of 35℃-50℃ after the machine starts running for several hours.
(8) Check whether the system pressure is normal.
(9) Check the extruder components, manifold components and die head for glue leakage.
(10) Check whether the guide rod of the closed cutter assembly is worn, whether the gap between the front cutter and the rear cutter is appropriate, and whether the cooling effect of the cutter is appropriate.
(11) Check whether there is any problem with the pneumatic system.
(12) Check whether the central lubrication system has sufficient lubrication for each moving element.
(13) Check whether the safety door limit switch is intact and triggered normally. If it is abnormal, it cannot be turned on.
(14) Check whether the main oil circuit on-off valve and valve core feedback input are triggered normally. If not, the machine cannot be started.
HUATAO provides blow molding equipment. Including:
Plastic Mold Equipment
Automatic Blow Molding Machine
Semi-automatic Blow Molding Machine
PS Foaming Machine
EPE Foaming Machine
PU Foaming Molded Machine
Horizontal lnjection Molding Machine
vertical lnjection Molding Machine
All-electric Injection Molding Machine
Thick Sheet Blister Machine
Thin Sheet Blister Machine
Color Plastic Masterbatch
Plastic Recycle Machine
Whether you need help with equipment selection, process optimization, or design customization, our team can help. We have the expertise and knowledge to analyze your project needs, identify challenges and develop innovative solutions.