Huatao Group teaches you how to extend the life of the bottle blowing machine, which is also a concern of bottle blowing machine users.
Generally speaking, when using a bottle blowing machine, you should operate it according to its safe operating regulations. If you use the bottle blowing machine correctly, the damage to the bottle blowing machine will be minimized. So what are the safe operating regulations for the bottle blowing machine?
1. Before starting each shift, lubricating oil must be added to all moving parts. (Robot, robot guide rail, opening and closing mold guide rail)
2. The arm swing can be added once every (3-4) days. The large and small chains of the heating machine can be used once a month. Always check whether the main engine reducer and heating machine reducer are short of oil. The main engine bearings can be added once (2-3) months.
3. Before production, check whether the moving parts are firm, whether the screws are loose and fall off, especially in places with strong impact force, and whether the belt transmission part is abnormal.
4. Check whether the high-pressure air source, low-pressure air source, power supply, and water source are normal.
5. Check whether the emergency stop switch, safety door switch, and protection device detection switch are normal.
6. Check whether the embryo feeding and embryo removing parts of the heating head are working properly. If the embryo insertion is not in place, the nut of the embryo pressing device can be adjusted.
7. Check whether the lamp is damaged or broken. Replace in time.
8. Check whether each pneumatic component is leaking and whether the action is sensitive.
9. Check whether the triplet is leaking abnormally, whether it is blocked, and whether the water cup is too full.
10. When the solenoid valve of the bottle blowing machine encounters an abnormality, it must be cleaned in time (cleaned once every 3.5 million bottles).
11. The bottle blowing mold must be cleaned and polished regularly.
12. When turning on the high and low pressure air source switch, you must move slowly to prevent the air source from flowing too fast and dirt blowing into the solenoid valve. At the same time, open the exhaust valve for 30 seconds to keep the air clean.
HUATAO provides blow molding equipment. Including:
Plastic Mold Equipment
Automatic Blow Molding Machine
Semi-automatic Blow Molding Machine
PS Foaming Machine
EPE Foaming Machine
PU Foaming Molded Machine
Horizontal lnjection Molding Machine
vertical lnjection Molding Machine
All-electric Injection Molding Machine
Thick Sheet Blister Machine
Thin Sheet Blister Machine
Color Plastic Masterbatch
Plastic Recycle Machine
Whether you need help with equipment selection, process optimization, or design customization, our team can help. We have the expertise and knowledge to analyze your project needs, identify challenges and develop innovative solutions.