Semi-automatic plastic molding machines have simple structure, easy operation, high efficiency and high degree of automation. They are the choice of small and medium-sized plastic manufacturers. Automatic operation and manual operation can be selected at will, suitable for people with different proficiency levels.
1. Control system: The central integrated control system can realize continuous plastic molding, such as feeding, heating, plastic molding, cooling, demoulding and cutting. Imported parts ensure the quality of the entire machine;
2. Electric furnace control: The electric furnace is made of stainless steel, which avoids product scrapping caused by iron oxide falling on the iron plate under the action of high temperature on the same type of iron plate;
3. Temperature control system: It uses far-infrared ceramic heating bricks, independent control switches, uniform temperature control, and built-in insulation materials to minimize heat loss and significantly save energy;
4. Cold air system: Equipped with a rapid cooling device of an air cooling system, there is no vibration and no residual air, speeding up production.
5. Control mode: Semi-automatic operation and manual operation can be selected arbitrarily. Except for loading and unloading and furnace movement, all actions can be automatic or manual; ensuring molding quality and improving product quality.
Failure analysis of semi-automatic blister machine:
1. The vacuum pump does not work: Check whether the output power of the host is normal, and refer to the corresponding instructions after confirmation.
2. No heating time: The electric furnace travel switch fails, the heating time relay fails, and the operation selection switch does not turn to the automatic position.
3. The lower mold does not rise, the lower mold solenoid valve fails, the lower mold solenoid valve coil fails, the lower mold operating switch does not turn to the automatic position, and the heating time relay fails.
4. Vacuum does not work: Check whether the upper travel switch of the lower mold is in place, whether the vacuum control valve is energized, and whether the time relay is working.
5. The automatic operation is normal, but some actions cannot work: manually check whether the circuit is normal, whether the control valve coil is damaged, manually check whether the electronic control valve is normal, and whether the gas circuit switch is open.
6. Temperature control failure: the heating brick in a certain area does not generate heat, whether the ceramic terminal of the heating brick has fallen off, whether the heating brick is damaged, whether the universal switch has power output, and whether the neutral line has fallen off.
HUATAO provides blow molding equipment. Including:
Plastic Mold Equipment
Automatic Blow Molding Machine
Semi-automatic Blow Molding Machine
PS Foaming Machine
EPE Foaming Machine
PU Foaming Molded Machine
Horizontal lnjection Molding Machine
vertical lnjection Molding Machine
All-electric Injection Molding Machine
Thick Sheet Blister Machine
Thin Sheet Blister Machine
Color Plastic Masterbatch
Plastic Recycle Machine
Whether you need help with equipment selection, process optimization, or design customization, our team can help. We have the expertise and knowledge to analyze your project needs, identify challenges and develop innovative solutions.